Mix & Fix Damp Wash

Mix & Fix Damp Wash

Damp & Salt Remover

Mix & Fix Damp Wash is an industrial-strength liquid solution specifically engineered to eliminate salt deposits, algae, and stubborn damp stains. Whether you are removing salt crystals or efflorescence from old masonry or preparing a new structure for its first coat of paint, this powerful solution neutralizes surface impurities to ensure a clean, healthy, and paint-ready finish.

Product Advantages

• Instant Salt Neutralizer: Chemically reacts with salt deposits to dissolve and remove efflorescence from brick and plaster.
• Algae & Fungus Killer: Quickly destroys organic growth, mold, and algae on exterior surfaces.
• Deep Cleaning Action: Penetrates the pores of concrete and stone to lift out deep-seated contaminants.
• Pre-Paint Essential: Provides a clean, neutral substrate that significantly improves the bond and lifespan of your paint.
• Versatile Dilution: Can be used at full strength for heavy damage or diluted for large-scale new construction.

Usage: Where to Apply?

• Brickwork: Perfect for treating salt-affected bricks before or after laying.
• Plastered Walls: Ideal for exterior and interior walls suffering from paint peeling due to salinity.
• Concrete & Stone: Use on fair-faced concrete, boundary walls, and natural stone surfaces.
• New Construction: An excellent preventative wash for new bricks and freshly cured plaster.

Application Instructions

For Damp & Salty Walls Repair:

1. Prep: Scrub the surface with a wire brush or sandpaper to remove loose paint, dust, and crumbling plaster.
2. Wash: For heavy salt, apply Damp Wash directly without dilution using a brush. For light salt, mix 1 kg of Damp Wash with 1 kg of water.
3. Scrub & Rinse: After a short period, scrub the area and wash with clean water.
4. Dry: Allow the wall to dry for at least 24 hours. Do not paint or plaster until the surface is completely dry.

For New Construction Prevention:

• Brick Soaking: Mix 1 kg of Damp Wash into 100 kg, approximately 100 liters, of water. Soak the bricks in this solution before laying to prevent future salt growth.
• Post-Plaster Wash: Mix 1 liter of Damp Wash with 10 liters of water and wash the plastered surface once it has cured.

Technical Summary

Appearance: Clear liquid solution

Pack Size: 1 liter bottle

Shelf Life: 24 months

Dilution New Bricks: 1:100

Dilution Standard Wash: 1:10

Drying Time: 24 hours

Precautions

• Safety First: Always wear protective gloves and eyewear during application.
• Eye Contact: If the liquid touches your eyes, rinse immediately with plenty of clean water.
• Wait to Paint: Never apply paint or plaster over a Damp Wash treatment until it has finished its 24-hour drying cycle.